Viewing And Selecting The Set Point; Viewing The Set Point; Selecting The Set Point; Selecting Eco Or Comfort Mode - BWT M.P.I. 100M Notice D'installation Et Conseils D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.

VIEWING AND SELECTING THE SET POINT

7.1

Viewing the set point

Press and release the "SET" key:
• The chill set point "SetC" or heat set point "SetH" is displayed at the bottom of the screen
• The set point is displayed at the top of the screen.
7.2

Selecting the set point

1.
Keep the "SET" set key held down for 3 seconds
2.
The current set point is displayed on screen, flashing
3.
Use the ▼ or ▲ keys to select the new setting
4.
Save the setting by pressing "SET" or wait 15 seconds.
Nota-bene:
In heat mode, the set point setting range is between 20 and 35°C.
In chill mode, the set point setting range is between 7 and 40°C
7.3

Selecting Eco or Comfort mode

1.
Press the "MENU" key
2.
Press the▼ or ▲ keys to scroll through the parameters until "Mode" is displayed.
3.
Press the "SET" key, Mode will start to flash
4.
Save the current setting by pressing "SET" or wait 15 seconds.
5.
Use the▼ and ▲ keys to display the desired mode "Eco" or "Conf"
6.
6) Press the "SET" key to save this setting.
42/96
2020/11 - Indice de révision : I - Code : 33340
CHAUFFAGE & DÉSHUMIDIFICATION

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

M.p.i. 160mM.p.i. 190mM.p.i. 190tM.p.i. 240mM.p.i. 240tM.p.i. 320t ... Afficher tout

Table des Matières