Display - BWT M.P.I. 100M Notice D'installation Et Conseils D'utilisation

Key Function
Press and release:
Displays the sensor readings
Press and release in programming mode:
Scrolls through all parameters.
During modification, changes the value of a parameter.
Press and release:
Starts/ stops the machine in chill mode
Press and release:
Starts/ stops the machine in heat mode
Press and release:
Enters/exits the function menu, allows access to the following parameters:
- Eco / Confort mode
- Display and reset active alarms
- Parameter "Pout", displays the power level "Step"
- Parameter "UPL" factory setting
- Parameter "ALOG" factory setting
Press and release in programming mode:
Returns to the previous programming mode level
6.3

Display

Icon Definition
Appears when the temperature is displayed
°C - °F
Appears when an alarm is detected
Appears when the Menu key is pressed
Appears when defrosting is active
Appears when the water flow rate through the exchangeur is too low or absent
Appears when the compressor is running
Appears when the machine is in heat or chill mode
40/96
2020/11 - Indice de révision : I - Code : 33340 CHAUFFAGE & DÉSHUMIDIFICATION