Introduction; Specifications; Warnings And Cautions; Warnings - Maytronics Dolphin Master M4 Mode D'emploi

Robotic Pool Cleaner MCC6/MTC6
User Instructions

1. INTRODUCTION

Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions, active brushing, and all-surface
climbing brush enhance maximum pool hygiene.
The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technologys, long lasting
performance and easy maintenance. You and your family will be free to enjoy your swim with full
confidence that your pool is completely clean.

2. SPECIFICATIONS

Motor protection: IP 68
Minimum depth: 0.80m/2.6ft
Maximum depth: 5m/16.4ft

3. WARNINGS AND CAUTIONS

3.1. Warnings

• Use the originally supplied power supply only
• Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
• Keep the power supply out of standing water
• Position the power supply at least 3m/10ft away from the edge of the pool
CAUTION
• Do not enter the pool while the Pool Cleaner is working
• Unplug the power supply before servicing

3.2. Cautions

When not in use store the Pool Cleaner on the Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine
pH
Temperature
NaCl
2
-Book_8151255_MCC6-MTC6.indb 2
leakage interrupter (ELI)
Max 4 ppm
7.0 - 7.8
6 – 34°C (43-93°F)
Maximum = 5000 ppm
Robotic Pool Cleaner MCC6/MTC6 | User Instructions
15/2/2012 10:47 AM