Maytronics Dolphin Master M4 Mode D'emploi page 7

While pushing the button on each
Click Click
float, pull it all the way out.
Position the power supply so that it is
approximately in the middle of the long side
of the pool at a distance of 3m/10ft.
10ft/3m
Attach the floating cable to the power supply
2
by inserting it with the notch on the connector (1)
lined up with the groove in the socket on the
1
power supply and turning clockwise (2).
Plug in the power supply and leave it in the OFF position.
Robotic Pool Cleaner MCC6/MTC6 | User Instructions
5
-Book_8151255_MCC6-MTC6.indb 5 15/2/2012 10:48 AM