Setting Time/Date (Time&Date) - Olympus DS-2 Mode D'emploi

Setting Time/Date (TIME&DATE)
If you have set the time and date, information as to when an audio file is recorded is stored
automatically with that file. The time and date should be set to ease file management tasks.
Also, it is required when performing timer recording and alarm playback.
The hour indicator will flash automatically when you load batteries before using the
recorder for the first time, or after the recorder hasn't been used for a long time.
Proceed from step 1.
MENU/SET
button
(Accepts a choice
and moves on to
the next item)
PLAY button
(Switching the
data displayed.)
STOP button
(Exits the menu)
1
Set the hour.
1 Press the 3 button or 2 button to set
2 Press the MENU/SET button to accept
2 button
• You can choose between 12 and 24 hour
(Alters a choice)
display by pressing the PLAY button while
3 button
setting the hour and minute.
(Alters a choice)
Example: 5:45 P.M.
2
Set the minute.
1 Press the 3 button or 2 button to set
2 Press the MENU/SET button to accept
3
Set the year.
1 Press the 3 button or 2 button to set
2 Press the MENU/SET button to accept
• You can choose the order of the year,
month, day by pressing the PLAY button
while setting them.
the hour.
the hour.
5:45 PM ← → 17:45
(Initial setting)
the minute.
the minute.
the year.
the year.
1
13