Trouble Shooting - Zipper Maschinen ZI-GPS70G Mode D'emploi

15

TROUBLE SHOOTING

Before servicing the machine and disconnect the spark plug!
Property damage and serious injury due to unintentional switching on the machine are
avoided!
Trouble
Motor does not start
Bad cuts: Brush cutter
Bad cuts: Trimmer
Bad cuts: Hedge trimmer
Bad cuts: Teig cuts
Machine does not work with
full power
Z.I.P.P.E.R MASCHINEN GmbH  www.Zipper-maschinen.at
Gartenpflegeset / Garden maintenance set ZI-GPS70G / ZI-GPS182G
Possible Cause
 No fuel
 Fuel not in fuel pipe
 Fuel filter clogged
 Spark plug dirty or damaged
 Faulty fuel line
 Foreign material wrapped, grass
around the sheet
 Long grass
 Blunt saw blade
 Cutting line too short
 Trimmer attachment empty
 Too much friction
 Sliding clearance too low
 Hedge trimmer is dull
 Chain is blunt
 Chain tension
 Chain incorrect installed
 Chain is hot
 Carburator incorrectly adjusted
 Machine is overload
 Silencer clogged
TROUBLE SHOOTING
Solution
 refuel
 Squeeze fuel nipple 3x
 Clean the filter in the fuel tank.
Use for refueling a filter to avoid
in future clogging.
 Clean spark plug from debris,
check contact distance, should
be 0.6 -0.7mm (credit card
thickness).
 Check fuel line for damage and
kinks
 Shut machine off, wait until
cutter stands still, remove the
winded up material
 Remove material
 Sharpen or replace saw blade
 Cutting line tracking
 Trimmer attachment change
 Oil Hedge Trimmer
 Liding clearance to make the
adjustments of (Customer
service)
 hedge trimmer sharpen let
(Customer Service)
 Let chain sharpen or change
(costumer service)
 Check chain tension
Mount chain correct.
 Theet must point in the cutting
direction
 Controll oil
 Let adjust by costumer service
 Exercise less power while
working
 Clean the outlet
Seite 53