Product Presentation; Mounting Kit - CDVI Digicode Série Manuel D'installation

INSTALLATION MANUAL
PROFIL100EC
Illuminated Mullion Weatherproof Keypad with Remote Electronics
Thank you for buying our products and for the confi dence you placed in our company.

1] PRODUCT PRESENTATION

Stainless steel.
Narrow: Ideal for installation
on an aluminium section.
Backlit.
2 relays.
Recommended for activating
and deactivating your alarm system.
Surface-mount.
Free voltage.
Installation with Diax
PCB of remote electronics
protected with a varnish coating.
100 user codes.
Audible and visual feedback.
Power supplies: 12V to 24V ac or 12V to 48V dc.
Consumptions: 30 to 100mA.
2] NOTES & RECOMMENDATIONS
Cable
- The distance between the PROFIL100EC
and the remote electronic can not exceed
more than 10 meters.
- Make sure that the cable is not near by a high
voltage cables (ex: 230V ac).
- Recommended cable between the PROFIL100EC
and the remote electronics: 2 twisted pairs
(4 wires) SYT1 0.8MM.
Mounting recommendations
Mount the keypad on a fl at surface to avoid
any vandalism and to insure the best mounting.

3] MOUNTING KIT

Mounting plate
for remote
electronics box
Remote electronics
PROFIL100EC
screws.
®
Wiring
Varistor
sealed cap
1 2
- -
Remote electronics, supplied
with the PROFIL100EC keypad
Security advice
- For security advice reasons, change
the factory default master code.
- When selecting a master code and user code
avoid simple codes (example : 3 4 5 6 7).
Installation recommendations
To secure the system from back electromagnetic
fi elds do not forget to mount the varistor
in parallel on the lock.
Recommended power supplies
suitable for the PROFIL100EC
ARD12 (230V input) or BS60 (230V input).
(M5x8 Diax T20 Diax
®
screw) Spanner
- -
1 1
WEEE & RoHS
IP64
CE certifi cation
Environmental tests:
vibrations
-25°C to +70°C
IP52 -25°C to +70°C
CE certifi cation
(M4x30)
Plastic
®
mounting
anchors
- 2
1 2
cdvi.com
cdvigroup.com
EN
screws
2
2
11