Wear Parts - Oase OptiMax 560 Notice D'emploi

- EN -

WEAR PARTS

The following components are wear parts
and are excluded from the warranty:
• Suction cups, impeller unit
REPAIR
A damaged unit cannot be repaired and
must be put out of operation. Dispose of
the unit in accordance with the regulations.
TROUBLESHOOTING
Issue Cause
The unit does not No mains voltage
start up
Impeller unit blocked
Water flow Position of the flow regulator
insufficient
Filter housing or impeller unit soiled, hose blocked
Hose defective
Hose kinked
Impeller unit worn
Only submersed Filter housing clogged
during installation
12
DISPOSAL
Do not dispose of this unit with domestic
waste! For disposal purposes, please use
the return system provided. Render the
unit unusable beforehand by cutting the
cables.
Solution
Check the mains voltage.
Clean
Readjust the flow regulator.
Clean
Replace
Route hose in a straight line
Replace impeller unit
Clean the filter housing.
OptiMax 560/800/1150/1420