Product Description; Installation And Connection - Oase OptiMax 560 Notice D'emploi

- EN -

PRODUCT DESCRIPTION

OptiMax 560/800/1150/1420, referred to
in the following as "unit", may only be
used as specified in the following:
• For maintaining the water circulation in
an aquarium.
• Operation under observance of the
technical data.
The following restrictions apply to the unit:
• Only use indoors and for aquaristic
purposes in the home (not for commercial
use).
• Only operate with water at a water
temperature of +4 °C to +35 °C.

INSTALLATION AND CONNECTION

NOTE
Ensure that the pump never runs dry!
Possible consequences: The pump will be
destroyed.
Protective measure: Regularly check the
water level in the aquarium.
10
A
• Fit the supplied suction cups with a
twisting movement.
– The suction cups adhere to clean,
smooth surfaces.
Submerged installation of the pump
B, C
• Fit the hose connector as required and
connect to a suitable hose. (→Technical
data)
• Adjust the flow at the flow regulator.
– To reduce the flow: Move the flow
regulator in the direction ‐.
– To increase the flow: Move the flow
regulator in the direction +.
• Install the device in the aquarium.
Dry installation
NOTE
The pump is not self‐priming and must be
installed below the level of the water.
OptiMax 560/800/1150/1420