Operating Elements And Connections; Special Notes For Laser Units; General Safety Notes - IMG STAGELINE LSE-10RG Mode D'emploi

All operating elements and connections
described can be found on the fold-out
page 3.
1 Operating Elements
and Connections
1 Locking screw (2 ×) for the mounting
bracket
2 Microphone for music control
3 Laser beam outlet
4 Desk stand
5 Mounting bracket
6 Control "Motor Controller" for the rotat-
ing speed of the laser dots
7 Button to activate and deactivate the
music control via the microphone (2)
8 Fan
9 Control "Strobeflash Controller" for the
flash frequency
10 Sliding switch to activate and deactivate
the laser effect unit and the flash feature
11 Jack DC 5 V for the power supply unit
provided
2 Safety Notes
The units (laser effect unit and power sup-
ply unit) correspond to all relevant direc-
tives of the EU and are therefore marked
with .

2.1 Special notes for laser units

This unit is a class 2M laser product. The
lasers have the following power and wave-
length:
green laser
red laser
WARNING In case of temporary expo-
sure (0.25 seconds max.), a
class 2M laser is safe for the
naked eye. However, it is
hazardous
through optical instruments.
In this case, the laser may
cause
damage.

2.2 General safety notes

WARNING The power supply unit uses
dangerous mains voltage.
Leave servicing to skilled
personnel only. Inexpert han-
dling or modification of the
unit may result in electric
shock.
Please observe the following items in any
case:
G
The units are suitable for indoor use only.
Protect them against dripping water and
splash water, high air humidity and heat
(admissible ambient temperature range
0 – 40 °C).
G
Do not operate the laser unit and immedi-
ately disconnect the power supply unit
from the socket
1. if the laser unit or the power supply unit
is visibly damaged,
Power Wavelength
30 mW 532 nm
60 mW 650 nm
when viewed
permanent retinal
GB
7