Appliance Functions - SilverCrest SLR 30 A1 Mode D'emploi Et Consignes De Sécurité

Appliance functions

Ion function
During operation, briefly press the ion function button
function. The ion function button
Press the ion function button
The ion function button
Fan function
The fan function of the appliance offers you the following setting options:
Sleep
►
Minimum fan speed for virtually silent operation and minimum airflow.
The illuminated ring
► Low
Low fan speed for low air flow
► High
High fan speed for high air flow
► Auto
Automatic adjustment of the fan speed and thus the air flow rate depending
on the current air quality (see table below):
Air quality
Good
Medium
Poor
If necessary, briefly press the fan function button
ation to select the desired setting (Sleep, Low, High, Auto). The selected setting is
displayed on the control panel
NOTE
► The standard setting for the fan function is Auto.
► The ion function cannot be activated in the Sleep setting.
■ 10 │ GB │ IE
e
lights up.
e
again briefly to switch off the ion function.
e
goes out.
w
is switched off in this setting.
Fan speed
Minimum
Low
High
1
and the fan function button
e
, to switch on the ion
Illuminated ring colour
Blue
Yellow
Red
r
several times during oper-
r
lights up.
SLR 30 A1