Springlane Frida Mode D'emploi page 18

Masquer les pouces Voir aussi pour Frida:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Repairs that go beyond the usual
cleaning and care process need to
be pe ormed by a qualified repair
service.
Always make sure that the cord
does not hang loosely from the
table or working su ace or within
the reach of children. Fu her-
more, it must not be in reach or
get in contact with hot pa s of the
device, other sources of heat or
sharp edges.
Never dip the power cord, stand
mixer or power plug into water or
other liquids since this may cause
fire, electric shocks or other injuries.
Do not put the stand mixer into
operation, if the power cord or
power plug are damaged. Let a
qualified repair service exchange it
for you.
BEFORE THE INITIAL START-UP
Before the initial sta -up, clean all pa s of the stand mixer with soapy water and
let them dry.
18
Do not put any metallic accessory
pa s into the microwave.
Always use only one accessory pa
at a time.
The stand mixer automatically
switches off if it overheats. In this
case, let it cool down for 15 minutes
before switching it on again.
The stand mixer automatically swit-
ches off if the engine head is li ed
or the power supply is not suff i-
cient. In order to take the stand
mixer back into operation, set the
speed to OFF and sta it again.
Children or persons with reduced
physical, sensory or mental abilities
may only use the stand mixer if
they are supervised.

Publicité

Table des Matières
loading

Produits Connexes pour Springlane Frida

Table des Matières