CoFFee PRePARAtion
1. Rinse then fill
the water tank with
potable water.
3. Lift the lever
completely and insert
the capsule.
4. Close the lever and
place a cup under the
coffee outlet.
2. Press the Espresso or Lungo button
to activate the machine.
CauTion: never lift lever during operation and refer to the safety precautions to avoid possible harm
when operating the appliance.
noTe: during heat up, you can press either coffee button while blinking. the coffee will then flow
automatically when the machine is ready.
5. Press the Espresso (40 ml) or the Lungo
(110 ml) button to start. Preparation will
stop automatically. to stop the coffee flow
or top up your coffee, press again.
Blinking Lights: heating
up (25 sec)
Steady Lights: ready
6. Remove the cup. Lift
and close the lever to eject
the capsule into the used
capsule container.