List of Materials
Parts supplied
Removing the packaging
CAUTION!
Remove carton carefully, Wear gloves to proctect against
sharp edges.
WARNING:
Remove the protective film convering the procudt before put-
ting into operation.
•
Hood canopy assembly with blower, transition.
•
Lamp already installed.
•
Grease filter.
•
Duct cover.
•
Hardware bag with:
•
Template
•
Duct cover support bracket (1 piece)
•
Use, care and installation guide
•
Wood screws (6 piece - 3/16" x 1"3/4)
•
Hood attachment anchors screw (6 pieces - 1/8"
x 3/8")
•
Assembly screw (4 pieces)
Parts not supplied
Optional Accessories
•
Ductless Recirculating Kit (Sold separately)
To be used only in the Ductless (Recirculating) version
Includes: charcoal filters and air deflector.
•
Stainless Steel Grease Filter
Tools/Materials required
•
Wire nuts
•
Tape to mount template
•
8" rounded metal duct legth to suit installation
•
Measuring tape
•
Pliers
•
Gloves
•
Knife
•
Safety glasses
•
Electric drill with 5/6" and 3/8" Bits
•
Strain relief
•
Spirit level
•
Duct tape
•
Screwdrive:
Phillips (Posidrive) #2
Torx # 20
•
Wire cutter/stripper
•
Masking tape
•
Hammer
•
Saw, jig saw or reciprocating saw
5