Practical Advice; Maintenance And Servicing; Maintenance And Cleaning; After-Sales Service And Advice On Using Products - Bosch LR 2 Professional Notice Originale

18 | English
Laser Beam Indicator Audio Signal
The position of the laser beam on the reception area (10) can also be indicated by an au-
dio signal.
You can increase the volume or switch off the audio signal.
To change the volume level or switch off the audio signal, push the audio signal button
(3) until the required volume level is indicated on the display. At a low volume, the audio
signal indicator (a) appears on the display with one bar; at a high volume, the indicator
appears with three bars. When the audio signal is switched off, the indicator goes out.
No matter how the signal tone has been adjusted, a brief, low-volume sound is emitted
for confirmation every time a button on the measuring tool is pressed.

Practical Advice

Marking
You can mark the height of the laser beam using the centre mark (8) on the left and right
of the measuring tool when the beam runs through the centre of the reception field (10).
Ensure that the measuring tool is aligned perfectly vertically (when using a horizontal
laser beam) or horizontally (when using a vertical laser beam) when marking as the
marks will otherwise be offset from the laser beam.
Attaching using a magnet (see figure B)
If an attachment is not required to be especially secure, then the measuring tool can be
attached to steel parts using the magnets (5).

Maintenance and Servicing

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.

After-sales service and advice on using products

Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
1 609 92A 4HW | (19.12.2018) Bosch Power Tools