Package Contents; Basic Function; Safety Instructions; Controls And Displays - HumanTechnik visuTone.air Mode D'emploi

Thank you for buying the visuTone.
air! Please read this manual care-
fully. It will tell you how to set up the
product correctly and explain all
the features it has to offer.

Package contents

Please check if the following items
are included:
- »visuTone.air« receiver
- Doorbell-pushbutton
- 3 batteries type C (R14)
- 1 button cell CR2032
- 2 screws
- 2 wall plugs
- User manual
- Warranty card
Should any parts be missing,
please contact your dealer or the
manufacturer immediately.

Basic function

The doorbell-pushbutton is installed
next to or in place of the existing
doorbell. When the doorbell button
is pressed, a radio signal is trans-
mitted to the receiver, which then
indicates the pressing of the button
either with sounds, light or both.

Safety instructions

Prior to putting this product into
operation, please read this manual
thoroughly.
Store this user manual in a safe
place so that it is also accessible
for other users at any time.
When using power tools: Always
follow the instructions of the manu-
facturer and wear protective equip-
ment.
Always check before starting to
drill if there are any electric cables
or water pipes in the wall. In case
of doubt we recommend using a a
cable detector.

Controls and displays

Legend to illustrations page 12:
Receiver:
1) Indicator for door (green)
2) Indicator for telephone (orange)
3) Battery indicator
4) Reset button (left side)
5) Flashing area
6) Speaker
7) Control wheel / button
8) Indication selector
9) DC-power socket
10) Battery compartment
Doorbell-pushbutton:
11) Indicator LED (green)
12) Pushbutton
Telephone transmitter
(accessory):
13) Indicator LED (orange)
14) Test button
15) RJ11-connector
English 13