Status; Database - Honeywell 301C Manuel De L'utilisateur

System Programming
Event Menu

Status

This screens displays the current event status and allows you to either
enable or disable, depending on the current status.
Enable event:This is a "toggle" switch; press Enter to change the value
If you have just gone through all the steps and programmed an event,
this screen will display "Enable event". Press Enter to activate all the
parameters and enable the Event.
If you are consulting an existing Event, this screen would display
"Disable event". You can press Enter to disable an Event that you do
not wish to delete but do not want functioning for any time. The
programming of this Event is always present, which means that you can
easily reactivate it by scrolling to this screen and pressing Enter.

Database

This screens displays the options linked to the database:
Erase current event:Lets user erase the current event
Erase all events:Lets user erase all events
52
from Enable to Disable and vice versa
-Status : disabled-
Enable event
.
Erase current event
Erase all events
301C User Manual
Honeywell
3. EVENT
3. Events 001
-Database-
001
510324
4/07