If you do not need to use the device for a rel-
atively long time, take it out of operation. To
do this, unplug the mains plug!
8.1.
Inserting the batteries into
the device
The battery compartment is located at the rear of
the device.
Release the latch and remove the battery com-
partment cover.
Insert four 1.5 V R6/LR6/AA batteries (not sup-
plied) with the negative ends on the springs. Re-
fer to the diagrams in the battery compartment!
Replace the battery compartment cover.
The device is battery-operated if no mains adapter is
connected to the DC 5.9V IN socket.
The device is now in standby mode.
WARNING!
Risk of explosion if batteries are re-
placed incorrectly.
Replace batteries only with the
76
same or equivalent type.