Texas A/S Pro Trac 700 Mode D'emploi page 24

Diesel engine:
 Empty the fuel tank and start the engine. The engine will stop when all fuel is used
 Let the engine run warm
 Remove the engine oil
 Immediately fill with fresh engine oil.
 Remove the nozzle from the cylinder and pour a few drops of oil into the cylinder.
Fit the nozzle again.
Clean all outer parts of the machine. Any damage should be repaired before storage.
All movable parts should be lubricated with a good oil, to prevent corrosion.
Empty the carburettor and fuel tank be letting the engine run dry.
Remove the spark plug and pour 50 ml. of oil into the opening. Pull the starting cord slowly
until you feel resistance. This prevents corrosion of the cylinder.
Change oil on engine and gear.
If the model is electric, the battery should be removed and fully charged. Store the battery
in a warm and dry place.
Cover the machine and store it in a clean and dry place.
If you are in any doubt contact your local Texas dealer.
24