Before Start - Texas A/S Pro Trac 700 Mode D'emploi

Gauge
30 cm
42,5 cm

5. Before start

Before starting the engine:
 Check the oil level of the engine. The oil level must be between the two marks. Use
SAE 30 engine oil, which is specially produced for air cooled engines. if this oil can-
not be bought use clean mineral oil with a viscosity of 15W-40. Use only oil of good
quality such as SC, SC, SE, SF and SG.
 Check all bolts and nuts, including those that attach the accessories. Check the till-
er for possible faults every time you use the machine. Pay special attention tho the
gas cable, the clutch handle, the stop button, the knives and for leakages of the fuel
system.
 Check the gears and PTO are in Neutral.
35 cm
50 cm
19