Functional Description - Makita 2012NB Manuel D'instruction

INSTALLATION
Movement and transport of planer
2
► 1 . Carrying handle 2. Sub-table
CAUTION:
• Watch your step when moving the tool.
Fold the sub-tables. Grasp the carrying handles when
moving the tool.
When transporting it by vehicle, secure with a rope
or other substantial means to prevent tipping or
movement.
Positioning the planer
249 mm
(9-3/4")
1
385 mm (15-1/8")
► 1 . Bolt or screw
Locate the tool in a well lit and level place where you
can maintain good footing and balance. Bolt/screw it
to the workbench or planer stand (optional accessory)
using the bolt holes provided in the base.
1
1
ø10 mm × 4

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
1
2
► 1 . Pilot lamp 2. Key 3. Switch lever
CAUTION:
• Before plugging in the tool, always be sure that
the tool is switched off. The pilot lamp lights up
when the tool is plugged into the power source.
To start the tool, insert the key and raise the switch
lever. To stop it, lower the switch lever.
CAUTION:
• When not using the tool, remove the key and
store it in a secure place. This prevents unau-
thorized operation.
Dimensional adjustment
1
1
2
3
► 1. Crank handle 2. Scale 3. Indicator plate 4. Main frame
Lower the main frame by turning the crank handle coun-
terclockwise until the indicator plate points to the scale
graduation indicating the desired finished dimension.
One full turn of the crank handle moves the main frame
2 mm (3/32") up or down. The scale has inch gradua-
tions on its right side and metric graduations on its left
side.
4 ENGLISH
3
4