Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
13)
Detach the material hose from the slot on the spray head.
14)
Loosen the pull wire by the adjustment screw. Pull the trigger disengage the pull
wire.
15)
Remove the spray head (fig. 10, 1) by pressing the lever (fig. 10, 2).
16)
Remove the adjustment ring (fig. 9,1) carefully from the connecting nut (fig. 9, 2).
Loosen the connecting nut. Remove the air cap (3), air screen (4), nozzle (5) and nozzle
seal (6) from the spray head. (Fig 9)
17)
Clean the air cap; air screen, nozzle and nozzle seal thoroughly.
Attention! Never clean the seals, nozzle- or air-holes with pointy metal objects.
18)
Remove the suction hose and thoroughly rinse the suction filter in flowing water.
19)
If necessary wipe the exterior of the spray lance.
Reconstruction
1)
Slide the nozzle seal with the groove (slot) facing forwards into the nozzle .
Insert the nozzle, keeping an eye on the grooves (Fig. 11)
2)
Put the air screen in the air cap. Put both on the nozzle and secure with the
connecting nut. (Fig. 12)
3)
Snap the adjustment ring into the connecting nut enabling the loop on the peg to
be positioned in the air cap. (Fig. 13)
Maintenance (Fig. 14)
Check the air filter (1) after use and replace depending on how soiled it is. Insert a new
air filter (order no. 2310 812) and replace the lid (2).
i
WARNING! Never operate the machine without the air filter; dirt could be
sucked in and interfere with the function of the machine.
Storage
After assembly, the air pipe and grab handle can no longer be separated.
i
Do not try to disassemble them by force!
•
Store the device only when cleaned properly.
•
Apply a thin coat of sliding grease at the marked points for preservation. (Fig. 16)
•
Release the pull wire.
•
Release the trigger stop.
Pos.
Name
1,2
Spray jet adjustment ring, union nut *
3,4,5,6
Nozzle set *
6
Nozzle seal (2x)
1-7
Complete spray head *
8
Spray head cover
9
O-ring
9,10
Spray lance *
24
Spare Parts List (Fig. 15)
WallPerfect W 985 E
Order No.
2310 811
2310 810
2304 433
2308 113
2308 176
2308 158
2310 816
Publicité
Table des Matières
