Angelcare AC420D Mode D'emploi page 14

testing your angelcare
Note: Test your Angelcare
and then periodically.
Step 1) Have someone else speak into the nursery unit or place
a radio near nursery unit. You should hear sound from the parents
unit. If there is no sound, refer to the Troubleshooting section.
If reception is not clear, switch to another channel (see channel
key in the Icon section).
Step 2) Verify that the battery mode is functional by operating
the nursery unit without the AC adaptors. The green Power light
should appear on the Nursery unit and the digital screen should
light up on the parents unit.
Parents unit: When the Low Battery indicator icon is almost
clear, place the unit on the charger.
Nursery unit: When the green Low Battery indicator light flashes
replace batteries promptly. On the parents unit screen, the low
battery icon will flash and the nursery icon will appear.
Warnings
• This product is NOT a substitute for direct supervision of
your baby. Check your baby's activities at regular intervals.
Monitoring of premature babies, or those considered to be
at risk, should be carried out only under the supervision of a
doctor or health professional.
• Make sure you DON'T put the parents unit near wireless devices
and microwave ovens. This may disrupt the transmission.
• ALWAYS place both units on a flat surface in an upright
position, away from baby's reach.
• Make sure to plug the adapter to the socket outlet nearest to
the equipment and that is easily accessible.
• DO NOT touch the end of the adapter cord when plugged into
an electrical outlet.
• The Angelcare Monitor uses public airwaves to transmit
®
signals. The parents unit may pick up signals or interference
from other nursery monitors in your area. Your monitor may
even be picked up by other households. To protect your privacy,
make sure both units are turned OFF when not in use.
• This product should be serviced by qualified personnel. There
are no user serviceable parts inside the monitor. Refer all
service questions to our customer service (see page 32).
care of you angelcare
RETAIN INSTRUCTIONS: Keep the user's manual for future
reference.
WATER, MOISTURE AND HEAT DAMAGE: Keep all components
away from water (sink, bath tub, swimming pool) and places that
emit heat (stove, radiator).
AC420D
monitor
®
Monitor BEFORE first-time use
®
monitor
®
Angelcare
Babyphon AC420D
sehr gut
ÖKO-TEST JAHRBUCH
Kleinkinder 2013
VENTILATION: ALWAYS place both units on a flat surface in an
upright position so that air can flow freely around them.
AC POWER SOURCE: Use only the AC adaptors supplied with the
Angelcare Monitor.
®
CORD PROTECTION: Avoid damage to the adapter cords. Route
cords so that they are not likely to be walked on or pinched by
items placed on or against them.
CLEANING: Disconnect all units before cleaning. DO NOT
immerse in water. Use a dry cloth to keep monitor free from dust.
DO NOT spray with cleaning products or solvents. Wipe with a
very slightly damp cloth with an antiseptic or mild detergent.
OBJECT AND LIQUID ENTRY: Care should be taken so that
objects do not fall onto units and that liquids are not spilled into
either unit through openings.
NON-USE PERIODS: When not using the monitor for a short
period, make sure to turn the units OFF before disconnecting
them, otherwise the units will revert to the battery mode. When
not using monitor for long periods, remove the batteries from
both units and disconnect the AC adapters from electrical outlet.
14