Angelcare AC420D Mode D'emploi page 13

ICON MEANING
In Range icon
NURSERY UNIT
Power switch on the left wing.
Power ON (green light)
and Low-battery indicator
(Flashing green light)
Night light button and channel
selector
In range selector on the right
wing
Microphone sensitivity dial
(Back of the Unit)
Angelcare
Babyphon AC420D
sehr gut
ÖKO-TEST JAHRBUCH
Kleinkinder 2013
FUNCTION AND USE
1) This icon will start flashing on the parents unit when the distance between
the units is over the maximum range. A beep will also be heard. To activate
this function, slide the right wing switch up. This option informs you when
the distance between the nursery unit and the parents unit is over the maxi-
mum range of transmission. To deactivate the In Range function, slide the right
wing down.
NOTE: Range: up to 250 meters/ 820 ft (open field); between 80 meters/ 262
ft and 100 meters/328 ft (indoors).
2) This icon will also flash with the channel number on the parents unit screen
when in channel selection mode.
Power ON = -
Power OFF = o
1) When the power is ON and the left wing button at the "‑" position, the
green light will appear.
2) If the back-up batteries are low, the green light will flash.
Note: The green light will flash for 45 minutes before unit shuts itself OFF.
1) Press ON/OFF for night light.
2) Push to change channel when the parents unit is on Channel Selection
Mode. (See the Channel Key section.).
Slide switch Up to be notified when the nursery unit signal does not
reach the parents unit. (See the "In Range" icon section.).
Increases and decreases the voice activation sensitivity.
Your Angelcare monitor is equipped with a voice-activated system. The
®
nursery unit will be activated and transmit sounds to the parents unit only when
it captures sounds. The sensitivity dial allows controlling the level of sound
picked up and transmitted by the nursery unit.
13
03/13
AC420D