Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
1500 Watt (cod. EH SAFE 15) / 2000 Watt (cod. EH SAFE 20)
PLEASE NOTE: safe use of this equipment can only be ensured if the user complies with these directions. Users must
therefore keep these directions at hand at all times. Helios Safe Industry is an extremely versatile infrared heater
designed and constructed according to good practice and assembled with the best components conforming to
standards and/or certificates for ensuring safety during use.
1. TECHNICAL DATA
2. CONSTRUCTION
• Steel body, oven epoxy powder coating
• Extra-pure, buffed, anodically oxidized aluminium parabolic reflector
• Front (ceramic, glass)
• Safety valve
• Silicone rubber seal
• Supply cable: length 1.5 m and; resistant to Temperature = 180° C
• Adjustable wall anchorage
WARNING
PLEASE NOTE: THIS HEATER IS SUITABLE FOR INSTALLATION IN EXPLOSIVE ATMOSPHERE CONDITIONS, CLASSIFIED
ZONE 2-22, PURSUANT TO DIRECTIVES 94/9 AND 99/92 EC ATEX
ZONE 2-22 indicates that the atmosphere, which is normally not explosive during routine use, may, on rare
occasions, briefly become explosive (generally in the presence of a malfunction). The heater therefore cannot be
installed in zones other than those classed as ZONE 2-22. T2 indicates that the ignition temperature of the
flammable gasses of the classified zone must be higher than 300°C. The table below (from EN 13463-1) lists other
temperature classes.
Temperature Class
T1
T2
T3
T4
T5
T6
Read the various indications on the name plate. Conditions of use must correspond to the data indicated on the
name plate.
HELIOS ELECTRIC INFRARED IRK
SAFE INDUSTRY MODEL
OPERATING INSTRUCTIONS
Maximum Surface Temperature (°C)
450
300
200
135
100
85
9
Publicité
Table des Matières
