Weelko MultiEquipment Mode D'emploi page 12

DIAMOND DERMABRASION
1. Correctly connect one side of the pipe to the rear
panel as indicated in the sketch.
2. Connect the opposite side of the pipe to the vacuum
handle. Place the correct diamond head in the handle.
There are nine types of diamond heads.
Ø 22 MM
Body. Suitable for acne, knees, elbows
D100
and areas with stretch marks
D180
Ø 19 MM
Face. Suitable for large spots, pores,
D180
aging sun exposure
D220
Ø 15 MM
Scars, fine lines and various imperfec-
D100
tions
D200
D250
Ø 8 Y 6 MM
Eyes and both sides of the nose.
D200
Wrinkles, acne, pimples and
D250
blackheads
3. Check that the foam filter is in its proper position in
the handle.
4. Check that the metal filter is in its proper position in
the handle.
5. You can adjust the suction effect by covering or
uncovering the hole in the side of the handle with your
finger.
6. Select the desired energy and time. You can change
setting anytime during working.
7. Press "START/PAUSE" button to start.
Cautions
•
Do not leave the handle on the same part of skin for
too long since it can cause injuries.
•
Avoid using it on irritated skin.
•
The following skin areas are unsuitable for these
treatments: skin tumors, moles, birthmarks,
angiomas, lips, eyes, herpes and warts.