Disposal; Troubleshooting - Waeco ColdMachine 54 Notice D'utilisation

_coldmachine.book Seite 50 Freitag, 8. Dezember 2006 1:27 13

Disposal

10 Disposal
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
When it comes time to scrap the device, ask your local recycling
centre or dealer for details about how to do this in accordance with
the applicable disposal regulations.
11

Troubleshooting

LED on the thermal element (fig. 1 2, page 3)
Number of
Error type
flashes
1 Battery protection shutdown
2 Fan overvoltage shutdown
3 Compressor start-up fault
4 Compressor overload shutdown
5 Electronic fuse shutdown
50
ColdMachine
Remedy
Check battery voltage, fuse and
cable cross section
Check condenser and vaporiser fan
current:
total target value < 0.5 A
Reduce load on cooling system:
– Ensure good ventilation around the
cooling unit
– Store pre-cooled goods
Reduce load on cooling system:
– Ensure good ventilation around the
cooling unit
– Store pre-cooled goods
Reduce load on cooling system:
– Ensure good ventilation around the
cooling unit