Charging The »Cm-Bt2; Charging The »Cm-Bt2« With The Power Supply; Charging The »Cm-Bt2« Via The Usb Port On A Computer; Cm-Bt2 Operating Time - HumanTechnik CM-BT2 Mode D'emploi

Charging the »CM-BT2«
The »CM-BT2« has an integral, rechargeable lithium polymer battery. Prior to
initial use, it is recommended that the »CM-BT2« is fully charged.
Please note that the »CM-BT2« cannot be used whilst it is
being charged
Charging the »CM-BT2« with the power supply
Connect the enclosed USB charging cable to the »CM-BT2« using the charger
connection 7. Connect the other end of the USB charging cable to the enc-
losed power supply. Insert the power supply into a 230 V plug socket. Status
indicator is red.
The »CM-BT2« is fully charged when the status indicator is blue.
Charging the »CM-BT2« via the USB port on a computer
Connect the enclosed USB charging cable to the »CM-BT2« using the char-
ger connection 7. Connect the other end of the USB charging cable to the
USB port on your computer. The »CM-BT2« is fully charged when the status
indicator is blue.
20 English

CM-BT2 operating time

In normal use, the »CM-BT2« has 3 hours of talk time and up to 120 hours
of standby time.
When the battery is discharged, the red status indicator flashes slowly and the
»CM-BT2« needs to be charged.
Note:
The operating duration is dependent on the way in which the »CM-BT2« is
used and on how high the volume is set.
Charging will take longer if the »CM-BT2« has not been used for a long time
and the battery has discharged itself.
English 21