Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EMPLOYER'S RESPONSIBILITIES
Employer must enforce compliance with the safety warnings and all other instructions contained in
this manual.
Keep this manual available for use by all people assigned to use this tool. For personal safety and
proper operation of this tool, read and follow a of these instructions carefully.
FASTENERS SPECIFICATIONS
3
24.DO NOT DRIVE FASTENERS on top of other fasteners, or with the
tool at too steep an angle: the fasteners can ricochet causing
personal injury.personal injury.
25.DO NOT DRIVE FASTENERS CLOSE to the edge of the work piece.
The work piece is likely to split allowing the fastener to fly free or
ricochet causing personal injury
26.KEEP ALERT. Watch what you are doing. Use common sense. Do
not operate any tool when you are tired. avoid injury.
27.KEEP HANDS AND BODY PARTS away from area shown in Fig. 13,
to is satisfactory.
28.THIS TOOL IS EQUIPPED WITH ADJUSTER that can adjust driving
depth. When adjusting the driving depth, first disconnect from air
supply and rotate the knob of the adjuster by hand until it.
29.WHEN NOT IN USE, tool should be cleaned and put it back into
the packing box. For safety, keep out of reach of children.
Publicité
Table des Matières
