Initial Use - Beurer WL 50 Mode D'emploi

Display
1 2
8 7

6. Initial use

First steps
1. Remove the packaging material.
2. Check that all parts listed are present
3. Check the device, USB mains adapter, micro USB cable and AUX cable for damage.
4. Place the device on a firm, even surface.
Note
You can operate the wake up light with the USB mains adapter via the socket, or use the battery.
4 5
3
1 Bluetooth
2 Alarm memory space 1
3 Time/Radio frequency/Melody selection
4 AUX mode
5 Battery state
6 Radio mode
7 Alarm memory space 2
6
8 "Sleep" function
.
34
®