Publicité
Les langues disponibles
Les langues disponibles
User's guide
Programming
• Up to three different sized meals per 24 hours.
• Each meal serving is adjustable with portions of approximately 25gr.
Dimensions
• 35,5 x 22 x 36 cm (assembled).
Capacity
• Hopper will hold 2.2kg of dry food.
Power
• Requires 3 X 1.5V size « C » batteries. Batteries NOT included.
• Use only alkaline batteries.
Types of Food
• Dry dog or cat food only.
• Do NOT use canned food. Do NOT use moist dog or cat food.
• Do NOT use semi moist food. Do NOT use treats.
Cleaning
• Dishwasher-safe: bowl, lid and container only.
• Remove the bowl, lid and container of the unit for cleaning.
• Allow to dry completely before putting dry food.
• The unit should never be put into the water. Use a soft cloth and neutral detergent.
READ ALL INSTRUCTIONS BEFORE OPERATING THE PRODUCT.
A. To install Batteries:
1)
Install 3 new « C » cell, alkaline batteries.
2)
Control the battery level with the indicator available on the LCD display.
3)
Switch « ON/OFF » button, located under the machine base, to ON before the programming.
B. To record 10 seconds voice message (mandatory stage):
1)
Press « Rec » button for 3 seconds.
2)
When red light is on, record your 10 seconds voice message.
3)
The red light will automatically turn off after 10 seconds.
4)
Press « Play » button to replay the recorded message. Every meal will play 3 times of the recorded message.
Even if the battery goes out, the recorded message will keep permanently.
NB: This recording can't be inhibited.
C. To schedule meal time, number of meal and portion:
1)
Select 12/24 hours made by pressing « Up » button anytime you need.
Press « Set » button to set the time on the LCD display.
« Hour » will flash, press « Up » to set the present hour. Then press « Ok » to confirm the time.
Same for the minutes, press « Up » to set the minutes. Then press « Ok » to confirm.
2)
« Meals » will flash. Press "Up" to select number of meals per day desired from 0 to 3:
0 = No meal
1 = Programmable Lunch from 11:00 to 16:00
2 = Programmable Breakfast from 5:00 to 10:00+ programmable Dinner from 17:00 to 22:00
3 = Programmable Breakfast from 5:00 to 10:00 + programmable Lunch from 11:00 to 16:00 + programmable
Dinner from 17:00 to 22:00
Press « Ok » to confirm.
3)
« Hour » of the first meal will flash; press « Up » to set the minute. Then press « Ok » to confirm.
4)
« Minute » of the first meal will flash; press « Up » to set the minute. Then press « Ok » to confirm.
5)
Then « Portion » will flash and may program to dispense portion from 1 to 12; One portion is equal to
approximate weight of 25g (depends on size of the food). Press « Ok » to confirm.
6)
Repeat above scheduled time for the next meal,
7)
« Total » display the total number of meal served; it will automatically added « 1 » after served.
SPECIFICATIONS
PROGRAMMING
5
Publicité
