Use Of The Programming Unit; Reading Out The Counter Contents Or Re−Setting The Counter; Reading Counter Positions Of Tapped Drinks; Reading Counter Positions Per Drink - BRAVILOR BONAMAT FreshOne Frshn−001 Mode D'emploi

6.

USE OF THE PROGRAMMING UNIT

The machine is provided with a programme with
which you as user can read data and set the
machine in accordance with your personal
requirements.
TIP
− The programme can be partly blocked.
Consult your installer for this.
6.1 Reading out the
counter contents or
re−setting the counter
D Press the programming button (19.4) to start
the programming.
The display alternately shows a three−figure and
a six−figure number.
The three−figure number gives the total of the
delivered cups, mugs and half or whole jugs
since the last resetting of the counter to zero.
The six−figure number gives the total number of
cups, mugs and half or whole jugs that the
machine since coming into operation for the
first time has delivered.

Fig. 9 Counter positions

6.1.1 Reading counter
positions of tapped drinks
D Select with the setting key (5.6 or 5.8) cup,
mug, half a jug or whole jug.
D Read the counter positions.
ECopyright Bravilor Bonamat B.V.
6.1.2 Reading counter
positions per drink
D Select the desired drink with one of the
selection buttons.
D Select with the setting key (5.6 or 5.8) cup,
mug, half a jug or whole jug.
D Read the counter positions; a black dot on the
display indicates the selected drink.
6.1.3
Resetting the counter
positions to zero
D Select any drink with one of the selection
buttons.
D Keep the button pressed down during 5
seconds.
The counter for all drinks is reset to zero for
cups, mugs, half jugs and whole jugs.
D Press the programming button (19.4) to return
to the base position of the display.
6.2

Setting possibilities

TIP
− All changes can be entered consecutively at
once, because they succeed each other.
− The following paragraphs describe the
procedures per setting possibility, i.e. not
consecutively.
6.2.1 Setting the amount of
drink
In the description of the setting of the amount of
drink below, 'regular coffee' is used as an
example.
D Press the programming button (19.4) to start
the programming.
D Press one time on the [Enter] key (5.7).
13
version 1.0