Switching On Or Off The Tapping Possibilities 'Mug, Half A Jug Or Whole Jug; Switching Off; Switching On; Fig. 10 Initial Situation Programming - BRAVILOR BONAMAT FreshOne Frshn−001 Mode D'emploi

Machine automatique a café frais moulu
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39

Fig. 10 Initial situation programming

D Press the selection button 'regular coffee'.

Fig. 11 Setting the amount of drink

D With the setting key (5.6 or 5.8) set the amount
of drink per cup.
TIP
− By pressing the setting key (5.6 or 5.8) longer
you quickly to through the range.
− See table 1 for the factory settings and the
(im)possibilities.
− Write your own settings with a pencil in the
table.
D Press the [Enter] key (5.7) for setting the
values for a mug.
D Press the [Enter] key (5.7) for setting the
values for half a jug.
D Press the [Enter] key (5.7) for setting the
values for a whole jug.
Now the amounts for 'mild coffee' and 'strong
coffee' have been set as well.
In the same way you can also determine the
amounts for 'extra strong coffee' and 'hot water'.
D Press the programming button (19.4) to finish
the programming.
14
version
1.0
Drink
Factory setting ml
'regular coffee' /
g
/
cup
'mild coffee '/
mug
'
'strong coffee'
g
ff '
1
/
jug
2
jug
'extra strong coffee'
g
cup
mug
1
/
jug
2
jug
'hot water'
cup
mug
1
/
jug
2
jug
Table 1 Settings of the amount of drink
6.2.2
Switching on or off the
tapping possibilities 'mug,
half a jug or whole jug'
If the machine has been set to paid delivery,
tapping a mug, half a jug or a whole jug is not
possible.
6.2.2.1

Switching off

D Decrease the value set for 'mug' to the
minimum (§6.2.1). The display shows 'OFF'.
Now the tapping possibilities for a mug is
switched off. When in use selecting 'mug' for
the drink involved gives no dot on the display;
this choice is not possible then.
This tapping possibility can be switched off in the
same way for all drinks.
D Press the programming key (19.4) to finish the
programming.
6.2.2.2

Switching on

D Increase the set value for 'mug' (§6.2.1). The
display again shows the value that you are to
set in ml. Now the tapping possibility for a mug
is switched on.
This tapping possibility can be switched on in the
same way for all drinks.
D Press the programming key (19.4) to finish the
programming.
ECopyright Bravilor Bonamat B.V.
Set by you ml
125
160
500
1000
80
OFF
OFF
OFF
140
160
500
1000

Publicité

Table des Matières
loading

Table des Matières