Stihl AL 101 Notice D'emploi page 20

English
DANGER
￭ Contact with live components can result in an electric
shock. This can result in serious or fatal injuries.
► Check that the connecting cable, extension cable and
their plugs are not damaged.
If the connecting cable or extension cable is
damaged:
► Do not touch damaged areas.
► Disconnect the plug from the wall outlet.
► Never touch the connecting cable, extension cable or
their plugs with wet hands.
► Insert the appliance plug of the connecting cable or
extension cable in a properly installed fused wall outlet
with ground contact.
► Install the charger with a ground fault circuit interrupter
(30 mA, 30 ms).
￭ A damaged or unsuitable extension cable can cause an
electric shock. This can result in serious or fatal injuries.
► Use an extension cable with the correct wire gauge,
@ 11.2.
WARNING
￭ Overvoltage can occur in the charger if the line voltage or
frequency are incorrect during charging. The charger may
be damaged.
► Make sure the line voltage and frequency agree with the
data on the charger's rating plate.
￭ If several chargers are connected to one wall outlet,
electric cables may be overloaded during the charging
process. The cables can overheat and cause a fire. This
can result in serious or fatal injuries and damage to
property.
► Connect the charger to a single wall outlet.
► Do not connect the charger to multiple sockets.
18
￭ A carelessly laid connecting or extension cable can be
damaged and cause others to trip or fall. This can result in
injuries and may damage the connecting cable or
extension cable.
► Position and mark connecting cable and extension
cable so they do not represent a trip hazard.
► Position the connecting and extension cables so that
they are not under tension or entangled.
► Position the connecting and extension cables so that
they cannot be damaged, kinked, pinched or chafed.
► Protect the connecting cable and extension cable from
heat, oil and chemicals.
► Lay the connecting and extension cables on a dry
surface.
￭ The extension cable becomes hot during operation. If the
heat cannot dissipate, it may cause a fire.
► If you use a cable drum: Unwind the extension cable to
its full length.
￭ If electric cables or pipes are embedded in the wall, they
may be damaged when the charger is mounted on a wall.
Contact with live components can result in an electric
shock. This can result in serious injuries and damage to
property.
► Check that there are no electric cables or pipes
embedded in the wall.
￭ If the charger is not mounted on the wall as described in
this instruction manual, the charger or the battery may fall
down or the charger may overheat. This may result in
personal injuries and damage to property.
► Mount the charger on the wall as described in this
instruction manual.
￭ If the charger is mounted on a wall with the battery
inserted, the battery may fall out and be damaged. This
may result in personal injuries and damage to property.
► Mount the charger on the wall first and then insert the
battery.
4 Safety Precautions
0458-511-9921-C