Storage - Agilent Technologies Turbo-V 70 PCB 24 Vdc Notice De Mode D'emploi

The following conventions are adopted in this manual:
Caution messages are provided before a procedure that could damage the
CAUTION!
equipment is not executed in the correct way.
WARNING! Warning messages call the operator's attention to a specific procedure or
operation that could cause serious personal injury if not executed in the
correct way.
Notes provide important information extracted from the text.
NOTE

Storage

The controller must be transported or stored within the following
environmental conditions:
Turbo-V 70 PCB 24 Vdc Controller User Manual / 87-900-933-01 (H)
Temperature: -20 °C to +70 °C
Relative humidity 0 to 95 % (non-condensing)
Instructions for Use

Storage

165/208
16