6 Limitations on Use
For use only by appropriately trained practitioners.
Should only be used with well fitting total surface bearing sockets with no reliefs or voids, which
have been constructed with air tight sockets and a suspension sleeve to create an air tight seal
proximally.
Intended life:
A local risk assessment should be carried out based upon activity and usage.
Lifting loads:
User weight and activity is governed by the stated limits.
Load carrying by the user should be based on a local risk assessment.
Environment:
Avoid exposing the device to corrosive elements such as water, acids and other liquids. Also
avoid abrasive environments such as those containing sand for example as these may promote
premature wear.
(5 ˚F to 122 ˚F)
Exclusively for use between -15 ˚C and 50 ˚C
.
938367SPK1/1-0121
10