Clarke Fusion 27 Manuel De L'utilisateur page 37

.
Clarke ®
Operator's Manual - Fusion 27 Battery Burnisher
MAINTENANCE
Adjusting Pad Head Limit Switch: (See figure 13)
1.Turn "ON" the key switch.
2. Press and hold the top of the head position switch to
raise the head.
3. Press and hold the bottom of the head position switch
to lower the head.
4. Traverse the machine to verify the pad motor comes
on. If not, the lever on the touch down switch must be
bent to contact the main frame sooner.
Figure #13
EN
- 37 -