Camera Setting - Sony HVL-F43M Mode D'emploi

Setting wireless flash by flash only
Once you have performed the wireless flash setup in step [A], if you continue to use
the same camera and flash combination without changing the wireless channel then
you can also set the flash and camera separately to wireless.

Camera setting:

Set the camera to the wireless flash mode.
For details, refer to the operating instructions supplied with your camera.
Flash setting:
1
Press the TTL/M button to display
• When selecting
set.
2
Press the MODE button repeatedly to display [WL], and
then press the Fn button.
3
Press the g or G button to make [RMT] or [RMT2] blink,
and then press the Fn button.
• Make sure that the wireless channel of the off-camera flash is set to the
same channel as the controller.
For details on setting the wireless channel, see "Custom settings" (page
, the flash unit fires with the power level to be
or .
).
67
57
GB