Sony HVL-F43M Mode D'emploi page 62

• The whole power level ratio is displayed using the flash-range/multiple-flash
frequency/flash-ratio display on the LCD panel for the wireless flash photography with
the lighting ratio control.
e.g.)
When a display is [4:2:1], the flash of each group fires with power level of 4/7, 2/7 and
1/7 of the whole.
1
Set the camera, flash (controller), and flash (off-camera
flash) to wireless flash.
Camera Setting:
Set the camera to wireless flash.
For details, refer to the operating instructions supplied with your camera.
Controller Setting:
1
Press the MODE button repeatedly to display [WL],
and then press the Fn button.
2
Press the g or G button to make [CTRL] and
[RATIO] blink, and then press the Fn button.
3
Press the f or F button to select the lighting ratio.
• The lighting ratio may be set to the following.
1, 2, 4, 8, 16, --*
* The flash unit cannot flash when the lighting ratio is set to [--].
4
Press the g or G button to select the lighting ratio
of the controller and off-camera flash units (RMT,
RMT2), and then press the Fn button.
• Set the power level ratio to [--] on the flash unit when there is an off-
camera flash (RMT/RMT2) you don't want to fire when you use the
flash unit with the controller after setting the flash unit to [CTRL1].
62
GB