C03 To select wireless control mode
control 1
When using the HVL-F43M as the controller in wireless flash photography, select
[CTRL1] or [CTRL2] depending on the models of the off-camera flashes.
Depending on the models of the off-camera flashes, the following appears on the
LCD display.
• [CTRL1] mode: [CTRL+]
When using only the HVL-F58AM, HVL-F60M, HVL-F43AM, HVL-F43M
or HVL-F42AM as an off-camera flash, select this mode.
• [CTRL2] mode: [CTRL]
When also using the HVL-F56AM or HVL-F36AM as an off-camera flash,
select this mode.
C04 To change the recording mode that can use the
manual flash mode (M) and multiple flash mode
M mode only
• When [PASM] is selected, manual flash photography and multiple flash
photography may be used in all recording modes of your camera. The proper
exposure may not be obtained with photography in modes other than the M
mode of your camera, therefore we recommend the M mode of your camera.
• When [PASM] is selected, this unit remains in manual flash mode even if the
recording mode of the camera is changed to A (automatic mode).
70
GB
control 2
All modes