Serial Numbers; Cleaning And Maintenance - Peg-Perego Seat Pop-Up Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

fit it accordingly. To lower the footrest push
the two levers downwards and then push
the footrest downwards (fig_a); to raise the
footrest lift it upwards (fig_b).
4 FIVE POINT SAFETY HARNESS: To fasten it,
push the two waist strap buckles (with the
shoulder straps attached – arrow_a) into
the leg divider until they click into place
(arrow_b). To unfasten it, press the round
button in the centre of the buckle (arrow_c)
and pull the waist straps out (arrow_d).
5 To tighten the waist strap, pull on both sides
in the direction of the arrow (arrow_a). To
loosen it, move it in the opposite direction.
6 To adjust the height of the safety harnesses,
release the two buckles on the rear of the
backrest.
Pull the shoulder straps towards you (arrow_a)
until the buckles are released and insert them
in the backrest loops (arrow_b). Remove the
shoulder straps from the sack (arrow_c) and
insert them in the most appropriate loop
(arrow_d), then re-attach the two buckles on
the rear of the backrest (arrow_e) The buckles
are securely attached when a click is heard
(fig_f).
7 HOOD: slide the hood's attachments into the
seat's attachments (fig_a), button the top part
of the hood on both sides of the seat (fig_b),
and finally fasten the sides with the elastics
(fig_c). The hood includes a slot from which
you can hang the child's favourite toy.
To remove the hood: pull out the attachments
and unbutton.
8 To extend the hood, unfasten the Velcro strap
on the rear (fig_a) and let the hood open
completely (fig_b). The hood comes with an
additional sun visor that can be pulled out at
the front (fig_c).
9 FOOT MUFF: Lift the leg rest, slide on the foot
muff and button it below (fig_a); then, slide
the foot muff under the front bar (fig_b).
Unbutton the hood's inside button on both
sides (fig_c) and button up the foot muff
(fig_d).
10 FASTENING THE SEAT TO THE CARRIAGE: Seat
Pop-Up can be secured to the carriage either
facing mom or the street. Place it centrally
on the carriage alongside the symbols (fig_a)
and press downwards with both hands
until it clicks into place (fig_b). To ensure it
is properly secured, grab the seat from the
front bar and pull upwards.
11 RELEASING THE SEAT FROM THE CARRIAGE:
Press the two buttons on the armrests of
the seat (fig_a) and then the two levers
underneath (fig_b); pull up the seat (fig_c)
until it releases. If the backrest is fully
reclined forward (in the closed position,
facing the world), the seat cannot be released
from the chassis (fig_d). In this case, lift
the backrest to the position of use before
releasing the seat from the chassis (fig_e).
12 RAIN COVER: Place the rain canopy over the
seat (fig_a), unbutton the hood's external
button, (fig_b) and secure the rain canopy
(fig_c).
13 Fasten the rain cover by hooking the elastics
to the side buttons on the foot rest of Seat
Pop-Up (fig_a). Rain cover fastened properly
(fig_b).
14 CLOSING THE STROLLER: To close the stroller
with the seat facing the street, press the
backrest adjustment handle (fig_a) and lower
the backrest fully forward (fig_b). To open it,
lift the backrest to the position of use, until
it locks into place (fig_c). To close the stroller
with the seat facing mom, fully recline the
backrest (fig_d).
15 REMOVING THE COVER: unbutton the cover
along the armrests (fig_a) and the backrest
(fig_b), remove the cover from the footrest
(fig_c), unfasten the side elastics (fig_d),
unscrew (fig_e) and remove the harness on
both sides, and finally remove the crotch
strap from above, pushing from under the
seat (fig_f).

SERIAL NUMBERS

16 Seat Pop-Up reports information as at the
date of manufacture of the product.
_ Product name, date of manufacture and serial
number of the seat.
This information is required for any
complaints.
THE ORIGINAL ACCESSORY
PEG PEREGO
Peg Perego accessories are designed as a
useful, practical means of simplifying the
lives of parents. Discover all your product's
accessories on www.pegperego.com

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged and
continuous exposure to bright sunlight may
give rise to colour changes of various different
materials; store this product in a dry place.
CLEANING THE RAIN CANOPY: wash with
a sponge and soapy water; do not use
detergents.
CLEANING FABRIC PARTS: Brush the fabric
parts to remove dust.
• When washing, closely follow the instructions
stated on the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
- 10 -

Publicité

Table des Matières
loading

Table des Matières