Detaching The Lens; Attaching The Lens - Sony ExwaveHAD SNC-CS3N Manuel D'installation

1 Cover
2
Lens cable
3
Rib (If the cable is thick, cut this off.)
4
Plug (not supplied)
5
Pin 4: Drive – (Ground)
6
Pin 2: Control +
7
Pin 1: Control –
8
Pin 3: Drive +

Detaching the Lens

2
Disconnect the lens cable from the LENS
connector.
Turn the lens counterclockwise to detach it
from the camera.

Attaching the Lens

1
Align the lens with the lens mount of
the camera, and turn it clockwise until
it is secured.
2
Insert the plug of the lens cable into
the LENS connector.
When fitting a manual-iris lens, omit
step 2.
1
3
If the focus cannot be adjusted
correctly at
focal length by turning the focal
length adjustment ring.
3
1
∞
(infinite), adjust the
Attaching a CS-mount Lens
2
23
GB