Eschenbach UniADAPT Mode D'emploi page 8

Adjusting the monocular system
Anatomical adjustments are carried out by the eyeglass optician.
Anatomical adjustments
1. Adjust side length.
2. Saddle bridge a: adjust to correct fitting position t with the fixing
screws.
3. Inclination (Frame angle): adjust to suit head position of user.
Fitting the monocular
{ The monocular can be fitted to the right or left eyepiece holder y.
Depending on the length position of the monocular, the fitting ring
i can be attached behind or in front of the eyepiece holder y by
screwing it onto the thread of the monocular o.
1. Insert monocular.
2. Using the fitting ring i or the eyepiece cup holder, u screw the
monocular to the eyepiece holder y.
3. Attach blinker r to other eyepiece holder.
Setting the pupil distance (PD)
1. Adjust the near / far PD using the scale on the eye-side e of the
carrier frame d.
{ Position the apex of the monocular lens as closely as possible to
the eye to ensure the maximum possible viewing field for the user.
2. Once the PD has been set, lock the eyepiece holder y with the
clips w.
- 8 -