Troubleshooting; Technical Specifications; X Parent Unit (Monitor); Baby Unit - Luvion GRAND ELITE Guide D'utilisation

TROUbLEShOOTING

Problem Solution
No video from the baby 1. Check all connections to the baby unit. Make sure the power adapter
unit is plugged in.
2. Make sure that both the baby and parent unit are switched on.
3. Make sure that the baby unit is in range of the parent unit.
4. When you are using batteries, try replacing them.
The video is dropping 1. Move the baby unit closer to the parent unit.
2. Try repositioning the baby and/or parent unit to improve the
reception.
3. Place the antenna of the parent unit in the vertical position.
Audio problems 1. Make sure that the volume on the TV is switched on.
2. Make sure that there is sound within range of the baby unit
microphone.
3. If the unit emits a loud screeching noise, move the baby and parent
unit further apart.
The video is or has become The video may become choppy when a lower frame rate is experienced
choppy (i.e. 10 frames per second instead of 20 frames per second).
1. Try moving the baby unit closer to the parent unit.
2. Remove obstructions between the baby and parent unit.
3. Place the antenna of the parent unit in the vertical position.
The video appears to be The use of the AV output is for convenience only. When it is used in
grainy when using the AV combination with a large screen TV or monitor, the video might be
out function to view the grainy as the camera limits the video resolution to VGA (640 x 480
video on a large screen TV/ pixels). This is not a product defect.
monitor
1. For the best video quality use the PIP (Picture in Picture) function of
your TV or monitor. Check your TV or monitor product manual to see if
this feature is available on your TV or monitor.
2. View the video on a smaller screen TV or monitor.

TEchNIcAL SPEcIfIcATIONS

Parent unit
Recieving frequency range 2.400GHz ~ 2.482GHz
Data rate 1.5 Mbps
Recieving sensitivity -81dBm
Demodulatie type GFSk met FHSS
Resolution H: 480 V: 240
Viewing angle H: 50° V: 50°
A/V Output / Resolution VGA 640x320 / 15FPS, QVGA 320x240 / 30FPS
Alarm sensitivity 80dB ±10% (1M)
Power requirement 5V DC ±5%
18
Power consumption 380mA Max without charging
800mA with charging
Operating temp range 10° ~ 40° C
Operating humidity 0 ~ 85% RH

baby unit

Transmit frequency range
Data rate
Transmitting power
Modulation type
Transmitting distance
Image sensor type
Effective Pixels
Image processing
Image resolution / frame rate
AES
White balance
AGC / Range
Lens
Viewing angle (diagonal)
Minimum illumination
IR LED / Night vision range
Power requirement
Power consumption
Operating temperature
Operating humidity
Environmental rating
LUVION
Premium Babyproducts
2.400GHz~2.485GHz
1.5 Mbps
14dBm (TYP)
GFSk with FHSS
300m (Line of Sight)
1/4" Color CMOS Image Sensor
H: 640 V: 480
Motion jPEG
H: 640 V: 480 / 30FPS Max
On 1/2000 ~ 1/20 sec
Yes
On / 0dB~24dB
4.9mm / F2.8
60°
2.5 LUX (IR Off ), 0 LUX (IR On)
8 LEDs / 850nm, 5m (with IR LED)
9V DC ±5%
330mA MAX (with Night Light)
250mA (without Night Light)
10°C ~ 40°C
0% ~ 85%
-10° ~ 60° C
19