1. Date & Time
You can display the time on the screen by setting it in
this submenu. The date and time have the following
value YY/MM/DD HH:MM:SS.
2. Brightness
The brightness of the screen can be adjusted with the
buttons. The button makes the screen darker and
the button makes the screen lighter.
3. Temperature Unit
Select the temperature unit you want to use. You can
choose between degrees Celcius or degrees Fahrenheit.
Note:
Because the temperature sensor is located next to the
(warm) camera, the measured temperature can deviate
slightly from the room temperature. The temperature
displayed on the screen is about 1-2 degrees Celcius
higher than the room temperature.
4. Temperature Alert
You can use this menu to set the temperature range of
the temperature alert. When the temperature is outside
this range, a warning sound will be emitted.
Use the
buttons to select the minimum and
maximum temperature, then use the
buttons
to set the temperature value. After successfully setting
the temperature range, select On and then press Ok to
confirm the settings.
Select OFF to disable the temperature alert.
12
2009/01/04
00:39:15
5. Camera Volume
You can speak to the baby unit when pressing the TALk
button on the parent unit. This menu is to adjust the
volume of your voice on the baby unit.
Press the
buttons to increase or decrease the volume.
6. Zoom
The video can be set at the original or double size by
selecting zoom 1x of zoom 2x in this menu. When the
video is in zoom 2x mode, the
buttons can be
used to view the parts outside the parent unit screen.
7. A/V Out
This menu lets you choose the TV system for AV Out. You
can choose between NTSC or PAL.
8. Screen Saver
Five images are stored in the system. You can select one
to display it on the screen of the parent unit in SCAN
mode. Or you can select Blank screen to make the screen
black in SCAN mode.
9. Format
Select Yes to format the Micro SD card. Formatting will
delete all the data stored on the Micro SD card.
Note:
Use with caution!
LUVION
Premium Babyproducts
13