Operation; Before Initial Use - Dometic CFX Série Notice D'utilisation

Masquer les pouces Voir aussi pour CFX Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 58
CFX100W
7

Operation

7.1

Before initial use

I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 28).
Reversing the lid opening direction
The lid hinges can be moved to the opposite side if you want to open the lid from the
opposite direction. To do this, proceed as show in:
See fig. 5, page 4
➤ Open the lid and remove it.
➤ Remove the three screws per hinge and take off the hinges.
➤ Remove the plastic covers from new hinge positions with a small screwdriver and
re-fit to the old hinge positions.
➤ Re-fit the hinges in the new positions.
See fig. 6, page 5)
➤ Remove the two plastic covers from the centre hinge.
➤ Remove the four screws from the centre hinge and take off the hinge.
➤ Remove the plastic cover from new centre hinge position with a small screw-
driver and re-fit to old hinge position.
➤ Re-fit the centre hinge in new position.
See fig. 7, page 6
➤ Remove the three plastic plugs per latch from the new latch position with a small
screwdriver.
➤ Remove the three screws per latch and take off the latches.
EN
Operation
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cfx100w

Table des Matières