Dometic CFX Série Notice D'utilisation page 21

CFX100W
Connecting to an AC power supply (e.g. in the home or office)
D
DANGER! Danger of electrocution!
• Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
• If you are operating your cooler on board a boat from a AC power
supply, you must install a residual current circuit breaker between the
AC power supply and the cooler.
Seek advice from a trained technician.
I
NOTE
Because of potential safety hazards under certain conditions, the
manufacturer strongly recommends against the use of an extension
cord.
The coolers have an integrated multi-voltage power supply with priority circuit for
connecting to an AC voltage source. The priority circuit automatically switches the
cooler to AC operation if the device is connected to an AC power supply, even if the
DC connection cable is still attached.
When switching between the AC power supply and the DC battery supply, the red
LED may light up briefly.
➤ Plug the AC connection cable (fig. 1 3, page 3) into the AC voltage socket of
the cooler (fig. 4 1, page 4).
➤ Connect the connection cable to the AC power outlet.
EN
Operation
21