Star SP500 Série Mode D'emploi page 27

Note
1) If the cutter doesn't return to the home position, or doesn't perform the
initial movement, it cannot be recovered.
2) If the paper is jammed, turn the power OFF, clear the jammed paper, then
turn the power ON.
3) When the error occurs:
STAR Mode: Non recoverable error
ESC/POS Mode: Recoverable error
*7 Turn the power OFF, clear the jammed paper or remedy another problem and
then turn the power ON. Automatically the printer is recovered if the carriage
returns to the home position after turning the power OFF and ON.
Restoration is also possible with the <DLE> <ENQ> n command when in the
ESC/POS mode.
When the error occurs:
STAR Mode: Non recoverable error
ESC/POS Mode: Recoverable error
*8 For paper jam errors:
Clear the jammed paper and change the paper roll if necessary.
For incorrect paper format errors:
Change the paper roll and use a paper roll with the correct black mark.
2) Non recoverable error
Error Description POWER lamp
Thermistor failure Off
error
Flash memory Off
write error
RAM R/W error Off
Power supply error Off
CPU error Off
Note
If a non-recoverable error occurs, turn the power OFF, wait at least 10 seconds,
and turn the power back ON. If the non-recoverable error continues to be
indicated, consult a dealer for repairs.
ERROR lamp Buzzer
Flashes (On: 0.25 2 short beeps (0.13 sec. + 0.5 sec.)
sec./Off: 0.25 sec.)
Flashes (On: 1 sec./ None
Off: 1 sec.)
On None
Flashes (On: 2 sec./ None
Off: 2 sec.)
On One long beep (2 sec.)
– 24 –