Star SP500 Série Mode D'emploi page 120

Appendix C: USB, Ethernet and Wireless LAN Interface
C-1. USB Interface Specifications
1. General Specification:
2. Communication Speed:
3. Communication Method: USB Bulk Transmission Mode
4. Power Specifications:
5. Connector:
C-2. Ethernet Interface Specifications
1. General Specification:
2. Communication Media:
3. Communication Speed:
4. Protocol:
5. TCP/IP detail:
6. Connector:
Note: Factory-set login password for administrator
One of the following protocols may be used for changing the settings
on this product:
HTTP (web), TELNET, or FTP. To do so, it is necessary to log in using
an administrator account for the product.
Use the following administrator account information on HTTP (web),
TELNET, or FTP.
Administrator account name: "root" (required)
Password:
The password may be changed after logging in.
C-3. Wireless LAN Interface Specifications
1. General Specification:
2. Communication Media:
3. Operating Channels:
Conforms to USB 2.0 Specifications
USB Full Speed Mode (12 Mbps)
USB Self-power Function
USB Up-Stream Port Connector (USB Type-B)
Conforms to IEEE802.3
10 Base-T/100 Base-TX
10/100 Mbps
TCP/IP
ARP, RARP, BOOTP, DHCP, LPR, #9100, FTP,
HTTP, TELNET, TFTP
RJ-45 (8-pin modular)
"public" (required)
Conforms to IEEE802.1lb
2.4 GH DSSS wireless CF card
Z
North America : 1-11 ch
Japan : 1-14 ch
Europe : 1-13 ch
– 117 –