Safety Considerations; Technical Data - Dustcontrol DC 5800 TR Notice Originale

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using this unit, basic safety precau-tions
should always be followed to reduce the risk for personnel
injury.
1. Operation
Always follow the regulations pertinent to the mate-
rial you are working with ie asbestos. Don´t use the
machine for purposes that it isn´t intended for.
2. Body injuries
Never let the suction come in contact with parts of
the body. Th e strong suction eff ect can
hurt the blood-vessels in the skin. See also below
under warnings.
3. Compressed air supply hose
Never pull the unit by the compressed air supply
hose. Th e supply hose must be correctly sized and
equipped with approved connectors. Check the con-
dition of the supply hose regularly. Th e unit should
not be used if the supply hose or hose connectors are
damaged.
4. Air defl ector
Th e bend on the outlet functions as a defl ector to
prevent injury from the powerful air stream from the
exhaust. Th e unit should not be used if this bend has

TECHNICAL DATA

Compressed air con -
sump tion at 6 bar
Connection dim.
Recommended quick
coupling
HxWxL
Weight
Inlet
Hose length
Collection in container
Flow, max
Neg. pressure, max
Fine fi lter polyester, area
Degree of separation
(DIN 24184/3)
Filter area, microfi lter
Degree of separation,
microfi lter (DOP)
Soundlevel
been removed.
5. Lock out
For cleaning and maintenance of the unit, it is impe-
rative to disconnect the compressed air supply from
the unit.
6. Maintain the machine with care
Keep machine clean and check that the hose is enti-
red and that all gaskets are tight. Follow instructions.
Keep handles dry and free from
oil and grease.
7. Checking of damage
Before futher use of the machine it should be ca-
refully checked that the machine is un damaged. If
there are any damaged parts these should be repaired
by of a Dustcontrol authorized service center.
8. Warning
Use only accessories and replacable parts which are
available in Dustcontrol catalogue. When using
faulty parts or pirate parts (especially fi lter) the
machine could leak out unhealthy dust which can
cause personal injuries.
3
Approx. 3,6 m /min (6 bar)
R 1"
Capacity
1''
1800x760x1000 mm
150 kg
X 76 mm
5-15 m
40
50 l
3
500 m /h
21 kPa (6 bar)
2
5 m
20
99.9 %
2.5 m 2 (Accessory)
> 99.97 %
< 75 dB(A)
DC 5800TR - 8
DC 5800 TR
6bar
4.5bar
200 400 600 800 1000 m 3 /h
Part No 9458